ADVANTAGES
1. Phoenix Clean 151 is a product can do both degreasing and dewaxing .
2. It can remove light oil quickly.
3. It has great degreasing effect on workpiece with heavy oil.
4. Its contain the special dewaxing additive removes the residual polished wax .
OPERATING CONDITIONS
| Item |
Range |
Best condition |
| Phoenix Clean 151 |
20 ~ 60g/L |
45-55g/L |
| pH arrange |
7.5-12.0 |
8.5-11.0 |
| Temperature |
50 ~ 70℃ |
55 ~ 65℃ |
| Time(about) |
3- 30min |
5-15min |
| Air stirring |
Suggested use |
Suggested use |
| Ultrasound |
Suggested use |
Suggested use |
| Cycle filtration |
Suggested use |
Suggested use |
Use Scenarios
Pre‑Anodizing Clean‑Up for Decorative Aluminum Components
Before performing anodizing, components such as architectural trims, decorative panels, jewelry, or hardware require wax and oil removal to avoid surface contamination. Using Phoenix Clean‑151 in that degreasing stage ensures that after the anodizing aluminum process, the final anodized aluminum finish is free from defects originating from residual wax or polish. It also supports better oxide formation, leading to more uniform coloration or coating adhesion. For businesses offering aluminum anodizing service, this improves visual quality, reduces post‑anodizing corrective work, and ensures consistent finishing outcomes across similar product types.
Maintenance Cleaning in Aluminum Service Plants
In places with regular production of anodized aluminum parts, equipment and parts are often handled, polished, waxed, or oiled prior to surface treatments. Periodic degreasing with Phoenix Clean‑151 can remove buildup of wax or oils, protecting the integrity of surfaces subjected later to anodizing or coating. It is especially useful when cleaning is needed before additional finishing steps like alodine coating or sealing. This helps aluminum anodizing service operations maintain consistent batch‑to‑batch results without optical flaws or delamination risks and ensures that no residual contaminants compromise final surface treatments.
Workshop & Kit‑Scale Preparation for Small Runs
For shops or lab settings using aluminum anodizing kit setups, even small batches or custom parts benefit from an effective degreasing‑wax removal agent. Phoenix Clean‑151 enables those users to prepare parts with correct cleaning before anodizing, so they can achieve anodized aluminum surfaces that would otherwise suffer from residual contaminants. The product’s ease of use, combined with flexible concentration and temperature ranges, supports repeatable performance even in manual operations. This is especially useful when wax polishing is part of the finishing before anodizing or when precise quality control is required at smaller scale.
About Us
Wuhan Fengfan International Trade Co., Ltd., wholly owned by Wuhan Fengfan Electrochemical Technology Co., Ltd., was founded in 1984, with over four decades of experience in surface treatment chemicals. The company produces anodizing chemicals, degreasing agents, sealing agents, additives, and post‑treatment agents. Phoenix Clean‑151 is part of its range of pretreatment and degreasing products used in aluminum anodizing service and process flows. Facilities occupy about 67 acres and ~7,000 m² of floor space. Annual capacity for surface treatment additives is about 3,000‑5,000 tons/year. Fengfan maintains R&D labs, quality control, safety production standardization, clean production credentials, and supports both large‑scale aluminum anodizing service providers and smaller users of aluminum anodizing kit workflows.
FAQ
What is Phoenix Clean‑151 used for?
It is used for degreasing and wax removal before anodizing steps, properly preparing surfaces in anodizing aluminum process workflows so that anodized aluminum finish quality improves.
What concentration should be used for this degreasing agent?
Dosage range is 20‑60 g/L, with optimal performance around 45‑55 g/L.
What temperature and duration are typical?
Operating temperature is 50‑70 °C, best roughly 55‑65 °C, and time ranges from 3‑30 minutes, typical 5‑15 minutes based on degree of contamination.
Does Phoenix Clean‑151 affect surfaces with heavy oil or residual wax?
Yes; it can remove both light oil quickly and handle heavy oil, and its dewaxing additive removes residual polished wax after mechanical polishing.
Is Phoenix Clean‑151 compatible with kit or large scale setups?
Yes; it is suitable for both aluminum anodizing service‑scale plants and smaller aluminum anodizing kit‑based operations, provided proper bath conditions (dosage, temperature, pH) are maintained.
Integrate Phoenix Clean‑151 into your anodizing aluminum process workflow for cleaner and more reliable anodized aluminum results!
